SALAMANDER PUMPS Salamander Ctforce20ps 2 Bar Single Positive Regenerative Shower Pump
Buy from National Shower Spares
£243.10
Overview
Is your shower not performing to the best of its abilities? Is the pressure low producing a trickle from the head? The solution? The CTFORCE20PS single impeller pump from Salamander. It’s a big upgrade at an affordable price and it’s easy to fit. A single impeller pump is designed to pump either hot or cold water to a shower or other outlets like a tap. They are most commonly used to pump the hot supply from a water system (gravity fed) where the cold supply is fed by the mains. They are also used when the cold water tank and hot water cylinder aren’t within a certain distance each other so for practical reasons two pumps would be used instead of a twin pump. As with most positive head pumps it is activated by the flow of water. Normally this is about 1 litre per minute. Anti-vibration are included to help with stability and noise reduction during operation. This means you can shower at any time of the day without the worry of waking others up. Working in a similar way to a powered water mill, regenerative pumps take hold of the incoming water, rotates it around and then throws it back out the opposite side of the impeller. The main advantages to a pump like this are its reliability and ease of installation. Provided with this pump is a 5 year guarantee! Features and Benefits: Regenerative type pump Compact seal Continuously rated Push fit flexible hoses are included (22mm) with integral isolating valves on inlets 1.25 metre pre-wired power cable Fully automatic Crossover technology Standard 5 year guarantee Robust brass impeller and brass end WRAS approved Anti-vibration feet are included Quiet 49dBA noise level Technical Specifications: 75ft head (2.0bar) Max amps/watts: 3.2 amps/580 watts Rating: Continuous Single Impeller Shower Pump Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap of shower more powerful. Positive Head A positive head shower pump is designed to be gravity fed, therefor it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower. Flexible hoses included This shower pump comes complete with 2 x 15mm to 22mm Straight Pushfit Couplers Brass Nut (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. Returns Policy - Changed Your Mind? If you change your mind about the product when you receive it you can notify us any time within 365 days and return it for a full refund at your own cost. Any refunds will be made within 30 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded. More details here
Overview
Is your shower not performing to the best of its abilities? Is the pressure low producing a trickle from the head? The solution? The CTFORCE20PS single impeller pump from Salamander. It’s a big upgrade at an affordable price and it’s easy to fit. A single impeller pump is designed to pump either hot or cold water to a shower or other outlets like a tap. They are most commonly used to pump the hot supply from a water system (gravity fed) where the cold supply is fed by the mains. They are also used when the cold water tank and hot water cylinder aren’t within a certain distance each other so for practical reasons two pumps would be used instead of a twin pump. As with most positive head pumps it is activated by the flow of water. Normally this is about 1 litre per minute. Anti-vibration are included to help with stability and noise reduction during operation. This means you can shower at any time of the day without the worry of waking others up. Working in a similar way to a powered water mill, regenerative pumps take hold of the incoming water, rotates it around and then throws it back out the opposite side of the impeller. The main advantages to a pump like this are its reliability and ease of installation. Provided with this pump is a 5 year guarantee! Features and Benefits: Regenerative type pump Compact seal Continuously rated Push fit flexible hoses are included (22mm) with integral isolating valves on inlets 1.25 metre pre-wired power cable Fully automatic Crossover technology Standard 5 year guarantee Robust brass impeller and brass end WRAS approved Anti-vibration feet are included Quiet 49dBA noise level Technical Specifications: 75ft head (2.0bar) Max amps/watts: 3.2 amps/580 watts Rating: Continuous Single Impeller Shower Pump Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap of shower more powerful. Positive Head A positive head shower pump is designed to be gravity fed, therefor it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower. Flexible hoses included This shower pump comes complete with 2 x 15mm to 22mm Straight Pushfit Couplers Brass Nut (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. Returns Policy - Changed Your Mind? If you change your mind about the product when you receive it you can notify us any time within 365 days and return it for a full refund at your own cost. Any refunds will be made within 30 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded. More details here